The Strainer filters possible contaminants through a 50 mesh screen.

Description: 2" NPT Y 50 Mesh

Part No.: 2790-00005

The Relief Valve is a SAFETY vent for excessive line pressure on the liquid side.

Description: 1/4 NTP 300 psi
[2 068.4 kPa]

Part No.: 0-48643

Hydrostatic Relief Valves: Pressure safety-relief valves are preset to 300 psi [2 068.4 kPa]. These protect piping from “ram,” “liquid hammer,” or surge effects that occur when valves suddenly close, instantly stopping an incompressible liquid flow. Liquid propane “flashes” (from a complete liquid to a partial- vapor state) after leaving the tank and passing through a restriction (such as the Strainer and Inlet Hand Valve),so it is somewhat compressible.

Main Solenoid Valve (Item 4): opened and closed by an electrical- powered solenoid and capable of handling liquid propane.

Description: 3/4 120V LP

Part No.: 2430-00061

The Liquid Regulator controls the line pressure to the Vaporizer.

Description: 1/2" NTP 30-60 psi

[206.8-413.7kPa] .25 ori.

Part No.: 2447-00001

The pressure gage indicates the fuel line pressure downstream of the lower orifice

Description: 0-200 psi
[0-1379 kPal] 1/4 NPT 2 1/2"

Part No.: 2460-00030

The pressure gage indicates the fuel line pressure downstream of the butterfly and upstream of the upper orifice.

Description: 0-30 psi [0-206.8 kPa] 1/4 NPT 2 1/2"

Part No.: 2460-00027

Burner Shutoff Valve

Description: 1x4x3/4"
Schedule 80 FPT Black

Part No.: 5630-00009

Metering Orifice Chart Click Below

Modulating Motor

The Maxon butterfly valve regulates the temperature of the burner

Description: 1 1/4" NPT Maxon

Part No.: 2431-00037

The Butterfly Valve (Item 11) rotates approximately 90 degrees from full-closed to full-open, to vary the inches of water-column pressure to the Burner. The Modulating Motor and Valve are connected with adjustable linkage.

The heat solenoid valve opens and closes to provide fuel to the main burner.

Description: 1 1/4" N 120v

Part No.: 2430-00007

Heat Solenoid Valve (Item 12): controls gas flow to the main Burner manifold on LP and natural gas Dryers. This valve is opened and closed by an electrically actuated solenoid as an automatically controlled safety device in the plumbing train.

Description: 1" 8-20 psi [55.1-137.9kPa] .50ori

Part No.: 2449-00032

Vapor Relief Valve

Pilot Regulator Valve

The pressure relief valve is a SAFETY vent for excessive line pressure on the vapor side.

Description: 1/2" Ball

Part No.: 2434-00004

The pilot solenoid valve opens and closes to provide fuel to the pilot section of the burner.

Description: 3/8" NPT-120v

Part No.: 2430-00062

Description: 0-30" WC 1/4 NPT
2 1/2"

Part No.: 2460-00025

Description: 1x4x3/4"
Schedule 80 FPT Black

Part No.: 5630-00009

Metering Orifice Chart Click Below